To start producing boxes you must apply a recipe to the S700 line.


To do it you must go to the operator pannel of the S700-GL, set the machine in the manual mode, also put in manual mode all the other machines (using the button "Request machines manual mode" and then go in the Format Change page.


IF NOT ALL THE MACHINES ARE IN THE MANUAL MODE YOU CAN'T GO IN THE FORMAT CHANGE MODE


Once you have entered in this mode you can search and select the desired recipe and load it.


BEFORE LOADING THE RECIPE MAKE SURE THAT ALL THE TOOLS OF THE PREVIOUS RECIPE HAS BEEN REMOVED AND THERE ISN'T ANYTHING IN THE MACHINE THAT CAN OBSTRUCT THE MOVEMENT.


When you press the "Load" button the Line anks you to confirm the selection and then it proceed to apply the recipe.


Once the recipe is loaded all the machines waits the confirmation of several dates specific for each machine.

To insert this dates you must select the Automatic mode and than a format will appear that allaws you to insert this data.

This format will appear only the first time you put the machine in Automatic mode after you apply a new recipe but can be recalled in the adjustment menu of each machine.


To finalize the applaying of a recipe to each machine see the dedicated chapter in ech machine's section.