Make sure you have read the 1.9.1 and 1.9.2 topics before poceed.
To finalize the Format Change for the S700-QS machine you must to follow the following steps:
- Insert the value of the mold's heigth
- Insert the value of the mold's attachig plate
- remove the previous mold using the clamping device in the rod's end
- put on the new mold and lock it with the clamping device
- if necessary, center the mold between the heads
- using the button in the "Working Position" menu, put the heads at the forming quotes, put on it a sheet of cardboard, approach the mold to the cardboard and, using the knobs, trim the centering tools so thath the cardboard could be formed properly
- put on a charging plane some cardboard sheets
- using that sheets adjust the position of the forntal guides and the rear guides that must block the cardboard in the optimal position